AudioCodes Mediant 1000 Manual de instalación descargar pdf (Pagina 70)

Installation Manual 70 Document #: LTRT-83506

Mediant 1000

5.2.2.2 Cabling OSN2

The procedure below describes the OSN2 cabling for Linux installation. The cabling is

performed on the iPMX module.

Note: If you want to use the VGA port, you can order the VGA cable separately

from AudioCodes.

¾ To cable OSN2:

1. On the device's iPMX module, perform the following:

a. Connect to the PC using one of the following methods:

♦ Connect the RS-232 port to a PC, using the RS-232 cable.

♦ Connect the VGA port to the monitor

b. Connect the USB port to an external CD-ROM drive, using the USB cable.

c. Connect the RJ-45 Ethernet port, using the Ethernet cable.

2. Connect the external CD-ROM to the power supply.

3. Connect the device to the power supply.

Figure 5-12: Cabling OSN2 (iPMX Module in Rear Panel)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 76

Sin comentarios

AudioCodes Mediant 1000 Manual de instalación Pagina 70