
MediaPack SIP User’s Manual 5. Configuring the MediaPack
Version 4.6 131 June 2005
Table 5-37: Board, ini File Parameters (continues on pages 128 to 131)
ini File Parameter Name Valid Range and Description
BootPDelay
The interval between the device’s startup and the first BootP/DHCP request
that is issued by the device.
1 = 1 second (default).
2 = 3 second.
3 = 6 second.
4 = 30 second.
5 = 60 second.
Note: This parameter only takes effect from the next reset of the device.
ExtBootPReqEnable
0 = Disable (default).
1 = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the BootP
request to provide device-related initial startup information such as board type,
current IP address, software version, etc. For a full list of the vendor specific
Information fields, refer to Section
7.3.2 on page 167.
The BootP
TFTP configuration utility displays this information in the ‘Client Info’
column (refer to Figure B-1).
Note: This option is not available on DHCP servers.
Comentarios a estos manuales