AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 32)

AudioCodes Mediant E-SBC 32 Document #: LTRT-40821

Microsoft Lync and XO Technology SIP Trunk

4.1 Step 1: IP Network Interfaces Configuration

This step describes how to configure the E-SBC's IP network interfaces. There are several

ways to deploy the E-SBC; however, this interoperability test topology employs the

following deployment method:



E-SBC interfaces with the following IP entities:

• Lync servers, located on the LAN

• XO Communications SIP Trunk, located on the WAN



E-SBC connects to the WAN through a DMZ network



Physical connection: The type of physical connection to the LAN depends on the

method used to connect to the Enterprise's network. In the interoperability test

topology, E-SBC connects to the LAN and WAN using dedicated LAN ports (i.e., two

ports and two network cables are used).



E-SBC also uses two logical network interfaces:

• LAN (VLAN ID 1)

• WAN (VLAN ID 2)

Figure 4-1: Network Interfaces in Interoperability Test Topology

Management

Station (OAMP)

Edge Router /

Firewall

ITSP

Communication

LAN

WAN

DMZ

195.189.192.155

10.15.45.11

LAN Port LAN Port

195.189.192.129

10.15.0.1

Vlan ID 1

Vlan ID 2

MS Lync Server

10.15.25.2

DC+DNS+Certificate Server

10.15.25.1

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 77 78

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 32