AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 69)

Configuration Note 4. Configuring AudioCodes E-SBC

Microsoft Lync and XO Technology SIP Trunk 69 AudioCodes Mediant E-SBC

4.14 Step 14: Miscellaneous Configuration

This section describes miscellaneous E-SBC configuration.

4.14.1 Step 14: Configure Call Forking Mode

This step describes how to configure the E-SBC's handling of SIP 18x responses received

for call forking of INVITE messages. For the interoperability test topology, if 18x with SDP

is received, the E-SBC opens a voice stream according to the received SDP. The E-SBC

re-opens the stream according to subsequently received 18x responses with SDP or plays

a ringback tone if 180 response without SDP is received. It's mandatory to set this field for

the Lync Server 2013 environment.

 To configure call forking:

1. Open the General Settings page (Configuration tab > VoIP menu > SBC > General

Settings).

2. From the 'SBC Forking Handling Mode' drop-down list, select Sequential.

Figure 4-41: Configuring Forking Mode

3. Click Submit.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 77 78

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 69