AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario descargar pdf (Pagina 40)

CTM; Reviewed:

SPOC 11/29/2007

Solution & Interoperability Test Lab Application Notes

40 of 51

AudioCodesMP118.doc

Step Description

20.

Hunt Group Settings

Select Protocol Management in the left pane and navigate to Hunt Group Settings in

the right pane.

Configure the parameters are described below.

 For Hunt Group ID 1 which contain the FXS (endpoint) ports, select the

Channel Select Mode as By Dest Phone Number. Thus, each port in this hunt

group will only be selected if its destination phone number is dialed. Select the

Registration Mode to be Per Endpoint.

 For Hunt Group ID 2 which contain the FXO (POTS) ports, select the

Channel Select Mode as Cyclic Ascending. The ports in this hunt group are

treated as a pool, and each will be selected in cyclic ascending order. Select the

Registration Mode to be Per Gateway. This allows the MP-118 to register

once for all the FXO ports using the gateway extension entered in Step 7. The

MP-118 requires that both the FXS and FXO ports be registered since

registration was enabled in Step 6. For the compliance test, it was chosen to

accessed using the gateway extension.

Click Submit.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 50 51

Sin comentarios

AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario Pagina 40