CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
48 of 51
AudioCodesMP118.doc
6. Interoperability Compliance Testing
This section describes the compliance testing used to verify the interoperability between the
AudioCodes MP-118, Avaya SIP Enablement Services (SES) and Avaya Communication Manager.
This section covers the general test approach and the test results.
6.1. General Test Approach
The general test approach was to make calls to/from the telephones connected through the MP-118
at the branch site using various codec settings and exercising common PBX features. This testing
included the analog telephones, and Avaya SIP telephones. The calls were made to/from the main
site, the PSTN and within the branch site. The same test cases, where applicable, were repeated with
a simulated data WAN outage.
6.2. Test Results
The AudioCodes MP-118 successfully passed compliance testing. The following features and
functionality were verified using an MP-118 analog endpoint when the data WAN was available.
Calls to/from the main site
Calls to/from the PSTN
Intra-branch calls
G.711mu and G.729AB codec support
Proper recognition of DTMF transmissions
Local device support for Hold, Transfer, and Call Waiting
Proper operation of voicemail with message waiting indicators (MWI). For the analog
phones, MWI was provided via stutter dial tone.
Call Forwarding provided by Avaya Communication Manager.
Conferencing (Avaya SIP telephone initiates a conference that includes an MP-118 analog
endpoint)
Extended telephony features using Avaya Communication Manager Feature Name
Extensions such as Conference On Answer, Call Park, Call Pickup, Automatic Redial and
Send All Calls. For more information on FNEs, please refer to [6].
T.38 fax support
Proper system recovery after a MP-118 restart
The following features and functionality were verified using an MP-118 analog endpoint when a
simulated data WAN failure was introduced.
Automatic failover to the POTS line to complete calls to the main site and PSTN using full
11 digit dialing. Incoming calls to the branch are limited to the single POTS number
assigned to the branch.
Intra-branch calls
Local device support for Hold, Transfer, and Call Waiting
The following observations were made during the compliance test:
The analog endpoints connected to the MP-118 do not support initiating a conference call.
When the data WAN is unavailable and an MP-118 analog endpoint calls the PSTN and does
an unattended transfer to another MP-118 analog endpoint, the originator of the transfer does
not hear ringback.
(236 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales