AudioCodes MP-20x Guía de instalación descargar pdf (Pagina 20)

AudioCodes Customer Support

Page 20

Q3: How do I make a three-way conference call (using Flash Hook Only)?

¾ To make a 3-way conference call:

1. Make a call to A, and then press the flash hook button.

2. Make a call to B, and then press the flash hook button again.

Flash Hook Only is configured in the Web interface’s ‘Dialing’ screen (Voice Over IP menu >

Dialing tab. Under the Key Sequence group, configure the flash hook sequence method.

Q4: Does MP-20x support SIP proxy redundancy?

Yes.

¾ To configure SIP proxy redundancy:

1. Logon to the Web interface.

2. Open the ‘Signaling Protocol’ screen (Voice Over IP menu > Signaling Protocol tab).

3. Under the SIP Proxy and Registrar group, select the ‘Use Redundant Proxy’ check box,

and then configure the redundant proxy parameters.

Figure 19: Configuring SIP Proxy Redundancy in the Web Interface

For additional information, refer to LTRT-58301 MP-20x Redundant Proxy Application Note

Ver. 2.6.2.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

AudioCodes MP-20x Guía de instalación Pagina 20