AudioCodes MP-20x Guía de instalación descargar pdf (Pagina 25)

AudioCodes Customer Support

Page 25

Q3: Why doesn’t MP-20x upgrade from a file in the HTTP server after it is retrieved?

Open the Configuration file (located on the HTTP server), and then check the version value of

the command line /rmt_config/version. The file on the server must have a higher version

value than the current version running on MP-20x.

¾ To view the current version in MP-20x:

1. Telnet the MP-20x.

2. At the CLI prompt, run the following command:

rg_conf_print /rmt_config/version

Q4: When is the configuration file retrieved from the HTTP server?

The configuration file is automatically retrieved four times after MP-20x reboots (every two

minutes), and thereafter, according to the timer of the check interval value. This interval value

can be viewed by performing a Telnet to MP-20x, and then running the following command:

rg_conf_print / rmt_config/check_interval

For example, if check_interval= 43200sec, this means 60sec*60min*12hours = every 12 hours

Q5: How do I open a TR-069 license?

¾ To open a TR-069 license:

1. Telnet the MP-20x.

2. At the CLI prompt, run the following command:

rg_conf_set /cwmp/tr069_licensed 1

1 2 ... 20 21 22 23 24 25 26

Sin comentarios

AudioCodes MP-20x Guía de instalación Pagina 25