AudioCodes MP-20x Guía de instalación descargar pdf (Pagina 8)

AudioCodes Customer Support

Page 8

Q3: Why can’t I access the MP-20x Web interface while connected to the WAN?

By default, access to the Web interface from the WAN is disabled.

¾ To enable access from the WAN:

1. Logon to the Web interface from the LAN.

2. Access the ‘Remote Administration’ screen (Advanced menu > Remote Administration

icon).

3. Under the Allow Incoming Access to the Web-Management group, select the Using

Primary HTTP Port check box to enable remote connection, as shown below:

Figure 2: Enabling Remote Administration (WAN) in the Remote Administration Screen

Q4: Why can’t I ping MP-20x?

By default, the parameter Allow Incoming ICMP Echo Requests is disabled (in the ‘Remote

Administration’ screen - see figure Figure 2). T

herefore, to successfully ping MP-20x, enable

this parameter by selecting this check box.

Q5: How do I ping/trace route from MP-20x to other devices in the network?

To ping/trace from MP-20x to other devices in the network, refer to LTRT-50606 MP-20x

Telephone Adapter User's Manual Ver. 2.6.2, Section 13.6, “Diagnostics”.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Sin comentarios

AudioCodes MP-20x Guía de instalación Pagina 8