AudioCodes MEDIAPACK VERSION 6.2 Manual de instalación descargar pdf (Pagina 23)

Version 6.2 23 February 2011

Installation Manual 2. Installing the Device

2.2.2 Unpacking and Checking Package Contents

Follow the procedure below for unpacking the carton in which MP-124 is shipped.

¾ To unpack MP-124:

1. Open the carton and remove packing materials.

2. Remove the MP-124 unit from the carton.

3. Check that there is no equipment damage.

4. Ensure that in addition to the MP-124 unit, the package contains the following items:

• AC power cable or an unwired DC terminal block with two crimping screws

(depending on ordered model).

• Two short equal-length brackets and bracket-to-device screws for 19-inch rack

installation.

• Regulatory Information document.

5. Check, retain and process any documents.

6. Notify AudioCodes or your local supplier of any damage or discrepancies.

2.2.3 Mounting MP-124

MP-124 can be mounted in one of the following ways:

 Desktop mounting (refer to 'Desktop Mounting' on page 23).

 Installed in a standard 19-inch rack (refer to '19-inch Rack Mounting' on page 24).

2.2.3.1 Desktop Mounting

For MP-124 desktop mounting, no brackets are required. Simply place MP-124 on a

desktop in the required position.

Figure 2-16: MP-124 Desktop Mounting

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 57 58

Sin comentarios

AudioCodes MEDIAPACK VERSION 6.2 Manual de instalación Pagina 23