AudioCodes MEDIAPACK VERSION 6.2 Manual de instalación descargar pdf (Pagina 31)

Version 6.2 31 February 2011

Installation Manual 2. Installing the Device

2.2.4.4 Connecting MP-124 RS-232 Port to a PC

Follow the procedure below to connect the MP-124 serial (RS-232) interface to a PC using

a standard, straight-through cable with DB-9 connectors on either end.

¾ To connect MP-124 to a PC:

1. Connect the DB-9 connector (refer to the figure below for connector pinouts) on one

end of the cable to the MP-124 RS-232 port (labeled RS-232).

2. Connect the DB-9 connector (refer to the figure below for connector pinouts) at the

other end of the cable to either the COM1 or COM2 RS-232 communication port on

your PC.

Figure 2-22: MP-124 RS-232 Connector Pinouts

For information on establishing a serial communications link with MP-124, refer to

‘Assigning an IP Address Using the CLI’ on page 41.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 57 58

Sin comentarios

AudioCodes MEDIAPACK VERSION 6.2 Manual de instalación Pagina 31