AudioCodes MP-1FXO Manual de usuario descargar pdf (Pagina 117)

100

101

SIP User's Manual 5. Web Management

Version 5.0 117 December 2006

5.5.8 Configuring the Hunt Group Settings

The Hunt Group Settings Table is used to determine the method in which new calls are

assigned to channels within each hunt group. If such a rule doesn’t exist (for a specific hunt

group), the global rule, defined by the Channel Select Mode parameter (Protocol Definition

> General Parameters), applies.

To configure the Hunt Group Settings table, take these 8 steps:

1. Open the ‘Hunt Group Settings’ screen (Protocol Management menu > Hunt Group

Settings); the ‘Hunt Group Settings’ screen is displayed.

Figure 5-26: Hunt Group Settings screen

2. From the 'Routing Index' drop-down list, select the range of entries that you want to

edit (up to 24 entries can be configured).

3. In the 'Hunt Group ID' field, enter the hunt group ID number.

4. From the 'Channel Select Mode' drop-down list, select the Channel Select Mode that

determines the method in which new calls are assigned to channels within the hunt

groups entered in the field to the right of this field. For information on available

Channel Select Modes, refer to Table 5-26 on page 118.

5. From the 'Registration Mode' drop-down list, select the registration mode.

6. Repeat steps 4 and 5, for each defined hunt group.

7. Click the Submit button to save your changes.

8. To save the changes so they are available after a power fail, refer to Section 5.10.2 on

page 205.

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 389 390

Comentarios a estos manuales

Sin comentarios

AudioCodes MP-1FXO Manual de usuario Pagina 117

Comentarios a estos manuales

Relacionado con productos y manuales para Redes AudioCodes MP-1FXO