AudioCodes MP-1FXO Manual de usuario descargar pdf (Pagina 205)

SIP User's Manual 5. Web Management

Version 5.0 205 December 2006

4. Click the LOCK button. If 'Graceful Option' is set to 'Yes', the lock is delayed and a

screen displaying the number of remaining calls and time is displayed. Otherwise, the

lock process begins immediately. The Current Admin State displays the current state:

LOCKED or UNLOCKED.

To unlock the gateway, take these 2 steps:

1. Access the 'Maintenance Actions' screen as described above in the previous

procedure.

2. Click the UNLOCK button. Unlock starts immediately and the gateway is ready for

new incoming calls.

5.10.2 Saving Configuration

The 'Maintenance Actions' screen enables you to save the current parameter configuration

and the loaded auxiliary files to the non-volatile memory (i.e., flash) so they are available

after a hardware reset (or power fail). Parameters that are only saved to the volatile

memory (RAM) revert to their previous settings after hardware reset.

Notes:

• Saving changes to the non-volatile memory may disrupt traffic on the

gateway. To avoid this, disable all new traffic before saving by

performing a graceful lock (refer to Section 5.10.1 on page 204).

• In the Web interface, parameters prefixed with an exclamation mark

('!') are saved to the non-volatile memory only after a device reset.

¾ To save the changes to the non-volatile, take these 2 steps:

1. Open the ‘Maintenance Actions' screen (Maintenance menu); the ‘Maintenance

Actions' screen is displayed.

Figure 5-72: Maintenance Actions Screen

2. Click the BURN button; a confirmation message appears when the save is completed

successfully.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 389 390

Sin comentarios

AudioCodes MP-1FXO Manual de usuario Pagina 205