AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 36)

Microsoft Lync and ThinkTel SIP Trunk

AudioCodes Mediant E-SBC Series 36 Document #: LTRT-38110

4.4 Step 4: Configuring Proxy Sets Tables

This step describes how to configure the proxy set tables. Proxy Set is a group of Proxy

servers defined by IP address or fully qualified domain name (FQDN). You need to

configure two proxy sets, one for the ThinkTel SIP trunk and the other for the Microsoft

Lync server.

These Proxy sets will be associated later with IP Groups.

¾ To configure Proxy Set Table 1 for Microsoft Lync:

1. Open the Proxy Sets Table page (Configuration tab > VoIP menu > Control

Network> Proxy Sets Table).

Figure 4-12: Proxy Sets Table 1

2. Set Proxy Set ID to 1.

3. Configure Microsoft Lync Server SIP Trunking IP-Address or FQDN and Destination

Port (e.g., FE-Lync.Lync.local:5067).

4. Set 'Transport Type' to TLS.

5. Set 'Enable Proxy Keep Alive' to Using Options.

6. Set 'Proxy Load Balancing Method' to Round Robin.

7. Set 'Is Proxy Hot Swap' to Yes.

8. Set ‘SRD Index’ to 1.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 62 63

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 36