AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 38)

Microsoft Lync and ThinkTel SIP Trunk

AudioCodes Mediant E-SBC Series 38 Document #: LTRT-38110

4.5 Step 5: Configuring IP Group Tables

This step shows how to create IP groups. Each IP group represents a SIP entity in the

gateway's network. You need to create IP groups for the following entities:

 Lync Server 2010 – Mediation Server

 ThinkTel SIP Trunk

These IP groups are later used by the SBC application for routing calls.

¾ To configure IP Group Table 1:

1. Open the IP Group Table page (Configuration tab > VoIP menu > Control Network>

IP Group Table).

Figure 4-14: IP Group Table 1

2. Add a new entry with index 1 (to represent the internal SIP peer).

3. From the 'Type' drop-down list, select SERVER.

4. In the 'Description' field, add a name that will help to identify this as the external group

(e.g., Lync).

5. From the 'Proxy Set ID' drop-down list, select 1 (to associate this IP Group with Proxy

Set 1).

6. From the 'Media Realm' drop-down list, select LanRealm (to associate this IP Group

with the LAN Media Realm).

7. Set 'IP Profile ID’ to 1.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 62 63

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 38