AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 49)

Microsoft Lync and ThinkTel SIP Trunk 49 June 2012

Microsoft Lync and ThinkTel SIP Trunk 4. Configuring the E-SBC Device

4.9 Step 9: Configuring IP Media

This step shows how to configure the number of media channels for the IP media. To

reform coder transcoding, define DSP channels. The number of media channels represents

the number of DSP (digital signaling processors) channels that the device allocates to IP-

to-IP calls (the remaining DSP channels can be used for PSTN calls). Two IP media

channels are used per IP-to-IP call.

Maximum number of media channels available on the Mediant 800 E-SBC device is 30.

Maximum number of media channels available on the Mediant 1000 E-SBC device is 120.

Maximum number of media channels available on the Mediant 3000 E-SBC device is 2016.

In this configuration, 120 channels are configured.

¾ To configure IP Media settings:

1. Open the IP Media Settings page (Configuration tab > VoIP menu > IP Media > IP

Media Settings).

Figure 4-27: IP Media Settings

2. Set 'Number of Media Channels' to 120.

Notes: This step is necessary only if transcoding is required.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 62 63

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 49