AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario Pagina 121

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 180
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 120
User's Manual 6. Configuring the MediaPack
Version 2.2 121 July 2007
Table 6-17: WAN and LAN IP Settings Parameters
Parameter Description
Using CLI
To change the Tel -> IP interfaces parameters:
1. Log on to the system.
2. From the main configuration mode, change to the “ip_interface” mode.
3. To enter the “ip_interface” mode use the command:
ip_interface <LAN | WAN>
4. Use the commands in square brackets ([]) to change the parameters.
Note: The media configuration is configured in the “port ethernet” mode. To enter the “port ethernet” mode, use
the command “port ethernet 0 <port num>”. Use port number “0” for the LAN interface and port number "1" for
the WAN interface.
Vista de pagina 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 179 180

Comentarios a estos manuales

Sin comentarios