AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario descargar pdf (Pagina 57)

User's Manual 4. Initial Configuration

Version 2.2 57 July 2007

d. From the 'Authentication Mode' drop-down list, select one of the following:

♦ ’Per User’ (default): requires the configuration of the SIP users as described

in Step 4.

♦ ‘Per Gateway’: requires that you provide ‘Default user name’, ‘Default user

password’ and ‘Default user cnonce’

(In our example setup for Unit A, the Authentication mode is set to ’Per User’.)

e. Click the Submit button.

5. If in the 'SIP Proxy & Registration' screen the Authentication mode was set to ‘per

user’, perform the following:

a. Access the 'SIP Users' screen (Protocol Management menu > SIP Gateway

submenu > SIP Users option).

Figure 4-12: SIP Users Screen

b. Add the SIP users ‘Name’ (phone number) and ‘Password'. (In our example

setup for Unit A, SIP user ID 1 was defined with the name "1000" and without a

password; SIP user ID 2 was defined with the name "3000" and without a

password).

6. Click the Submit button.

7. In our example setup, verify that Users [email protected].2.35 and [email protected] are

registered at the Proxy Server 10.33.2.20.

For additional SIP-related parameters, refer to Section 'SIP Gateway' on page 80.

For detailed information on the parameters ‘Registration Time’ and ‘Authentication Mode’,

refer to refer to Table 6-2 on page 83.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 179 180

Sin comentarios

AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario Pagina 57