AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario Pagina 151

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 180
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 150
User's Manual 6. Configuring the MediaPack
Version 2.2 151 July 2007
Table 6-28: Load CLI Parameters
Parameter Description
Using CLI
To load the configuration via CLI:
1. Open a CLI session using Telnet or a serial connection.
2. Log on to the system. Default username and password: user=”Admin”; password=”Admin”.
3. Type the enable command to acquire administrative privileges.
4. Change the mode to “configuration”.
5. Use the command copy <source> <target>. For example:
copy tftp://10.33.2.2/MediaPack.cfg startup-config
Vista de pagina 150
1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 179 180

Comentarios a estos manuales

Sin comentarios