AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario descargar pdf (Pagina 143)

User's Manual 6. Configuring the MediaPack

Version 2.2 143 July 2007

 Boot Loader Version: Boot Loader Version

 Board Descriptor Version: Board Descriptor Version

 DSP Kernel Version: SW Version of the DSP Kernel

 DSP Program Version: SW Version of the DSP

 PCB Version: Version of the PCB

6.4.2 ISDN Ports Status

¾ To view the MediaPack's ISDN Port State:

 Open the 'System Information' screen (Status & Diagnostics menu > System

Information submenu > System Information option

The Screen shows the following information:

 Port: Port Number

 State: ISDN Port state: UP: Layer 1 is up or ISDN Layer 1 is down. Note this does not

indicate if a cable is plugged in or not

 Layer 2 Protocol: The ISDN Layer 2 protocol used on this port.

 Is Clock Source: Indicates if the port is configured as clock source

 Number of Slips: Number of slips on this link. The counter will be reset if the ISDN link

goes down.

 Is Syncronous: Indicates if the ISDN port is Synchronous to the Network. This is only

true if the port is configured as clock source.

To view the ISPN port status using the CLI, use the command: show isdn status

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 179 180

Sin comentarios

AudioCodes MEDIAPACK VERSION 6.2 Manual de usuario Pagina 143