AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 15)

Configuration Note 3. Configuring Microsoft Lync Server 2013

Connecting Microsoft Lync 2013 to a SIP Trunk 15 June 2013

3 Configuring Microsoft Lync Server 2013

This section shows how to configure Microsoft Lync Server 2013 to operate with

AudioCodes' E-SBC.

Note: Dial plans, voice policies, and PSTN usages are also necessary for enterprise

voice deployment but are beyond the scope of this document.

3.1 Configuring the E-SBC as an IP / PSTN Gateway

This section shows how to configure the E-SBC as an IP / PSTN Gateway.

 To configure the E-SBC as an IP/PSTN Gateway and associate it with a

Mediation Server:

1. On the server where the Topology Builder is installed, start the Lync Server 2013

Topology Builder: Click the Windows Start menu > All Programs > Lync Server

Topology Builder.

Figure 3-1: Starting the Lync Server Topology Builder

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 15