AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 51)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 51 June 2013

3. Add an IP Profile for the SIP Trunk:

a. Configure the parameters like this:

Parameter Example Setting

Profile ID

Media IP Version Preference

Only IPv4 / Only IPv6

Extension Coders Group ID

Coders Group 2

Allowed Coders Group ID

Coders Group 2

Allowed Coders Mode

Preference (enables the received SDP offer to

list Allowed coders first and then the original

coders received in the SDP).

Media Security Behavior

RTP

SBC Remote Refer Behavior

Handle Locally (the E-SBC handles the

incoming REFER request itself, without

forwarding the REFER towards the SIP Trunk)

Note: The SIP Trunk's IP Profile depends on the SIP Trunk behavior. Refer to the

explanations of the IP Profile parameters in the E-SBC User's Manual in order

to configure the profile according to SIP Trunk behavior.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 79 80

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 51