AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 37)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 37 June 2013

4.1.1 Configuring IP Network Interfaces for LAN and WAN

This subsection shows how to configure IP network interfaces for:



LAN VoIP (Voice)



WAN VoIP (WANSP)

 To configure the interfaces:

1. Open the Multiple Interface Table page (Configuration tab > VoIP > Network

Settings > IP Settings).

Figure 4-2: Multiple Interface Table

2. Modify the existing LAN network interface:

a. Select the 'Index' radio button adjacent to Application Type OAMP + Media +

Control and click Edit.

b. Configure like this:

Parameter Example Setting for IPv4 Example Setting for IPv6

Application Type

OAMP + Media + Control

(application)

Media + Control.

The OAMP application can be

configured only with IPv4.

Interface Mode See IPv4 in the E-SBC

documentation.

See IPv6 in the E-SBC

documentation.

IP Address "10.15.45.101"

(E-SBC IP address)

"2001::101"

(only a global address can be

entered)

Prefix Length "16" for 255.255.0.0

(Subnet mask, in bits)

"64" (only 64 is supported)

Gateway Default Gateway

"10.15.0.1"

"2001::1"

VLAN ID VLAN ID. "1". "1"

Interface Name Arbitrary descriptive name

"Voice"

"IP6Voice"

Primary DNS Server

IP Address

DNS IP address

"10.15.21.10"

"2001::10"

Underlying Interface

GROUP_1

(Ethernet port group)

GROUP_1

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 79 80

Comentarios a estos manuales

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AudioCodes Mediant 3000