AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 36)

Connecting Microsoft Lync 2013 to a SIP Trunk

AudioCodes Mediant E-SBC 36 Document #: LTRT-54004

4.1 Step 1: Configuring the E-SBC's Network Interfaces

The subsections below show how to configure the E-SBC's network interfaces. Several

methods can be used. The scenario exemplified in this document uses this method:



The E-SBC interfaces are between the Lync servers located on the LAN and the SIP

Trunk located on the WAN.



The E-SBC connects to the WAN through a DMZ network.

The type of physical LAN connection depends on the method used to connect to the

enterprise's network. In this example, the E-SBC connects to the LAN and WAN using

dedicated LAN ports (i.e., two ports and network cables).

In addition, the E-SBC uses two logical network interfaces; one to the LAN (VLAN ID 1)

and one to the WAN (VLAN ID 2).

Figure 4-1: Network Interfaces

Management

Station (OAMP)

Edge Router /

Firewall

ITSP

LAN

WAN

DMZ

195.189.192.155

10.15.45.101

LAN Port LAN Port

195.189.192.129

10.15.0.1

Vlan ID 1

Vlan ID 2

MS Lync Server

10.15.21.11

DC+DNS+Certificate Server

10.15.21.10

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 79 80

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 36