AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 73)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 73 June 2013

4.16 Step 16: Resetting the E-SBC

After completing the configuration of the E-SBC as described in the preceding steps, save

(burn) the configuration to the E-SBC's flash memory with a reset; the settings will now

take effect.

 To save the configuration to flash memory with a reset:

1. Open the Maintenance Actions page (Maintenance tab > Maintenance >

Maintenance Actions).

Figure 4-42: Resetting the E-SBC

2. Ensure that the 'Burn to FLASH' field is set to Yes (default).

3. Click the Reset button.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 73