AudioCodes Mediant 3000 Manual de usuario descargar pdf (Pagina 35)

Configuration Note 4. Configuring AudioCodes E-SBC

Connecting Microsoft Lync 2013 to a SIP Trunk 35 June 2013

4 Configuring AudioCodes E-SBC

This section shows how to configure AudioCodes' E-SBC for interworking between

Microsoft Lync Server 2013 and an ITSP's SIP Trunk:



E-SBC WAN interface: SIP Trunking environment



E-SBC LAN interface: Lync Server 2013 environment

Configure the E-SBC using the Web-based management interface (embedded Web

server).

Notes:

• The E-SBC must be installed with a Software Feature Key that includes the

following items:

√ Microsoft

√ SBC

√ Security

√ DSP

√ RTP

√ SIP

For more information about the Key, contact your AudioCodes

representative.

• The scope of this document does not cover security aspects of connecting

a SIP Trunk to the Microsoft Lync environment. Security measures should

be implemented in accordance with your organization’s security policies.

For basic security guidelines, see the Recommended Security Guidelines

Technical Note.

• The E-SBC must be installed with SIP firmware version 6.6 or later.

• Before beginning to configure the E-SBC, select the Full option in the Web

interface to display the full Navigation tree:

When the E-SBC is reset, the Web interface reverts to Basic display.

• This document applies to Microsoft Lync 2013 and to Microsoft Lync 2010.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 79 80

Sin comentarios

AudioCodes Mediant 3000 Manual de usuario Pagina 35