AudioCodes MediaPack MP-124 Manual de usuario descargar pdf (Pagina 28)

Microsoft Lync Server 2013 28 Document #: LTRT-40127

Enhanced Gateway with Analog Devices

4.5 Step 5: Configuring IP Groups

This step shows how to create IP Groups. An IP Group represents a SIP entity behavior in

the device’s network. In the example scenario, the following IP Groups are added:



Microsoft Lync Server 2013 for the Gateway entity



Microsoft Lync Server 2013 for the SBC entity



Internal leg to be reached by the Gateway entity



Internal leg to be reached by the SBC entity



Analog Devices (assigned as Users and been registering to the SBC)

Note: These IP Groups are later used by the device for routing calls.

 To configure IP Groups:

1. Open the IP Group Table page (Configuration tab > VoIP > Control Network > IP

Group Table).

2. Add an IP Group for the Lync Server for the Gateway entity:

a. Click Add.

b. Select the Common tab, and then configure the parameters like this:

Parameter Example Setting

Index 1

Type Server

Description Gateway- Lync (a descriptive name)

Proxy Set ID 1

SRD 1

Media Realm Name MRLan

IP Profile ID 0

c. Select the SBC tab, and then configure the parameters like this:

Parameter Example Setting

Index 1

Classify By Proxy Set Disable

d. Click Submit.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 97 98

Sin comentarios

AudioCodes MediaPack MP-124 Manual de usuario Pagina 28