AudioCodes MediaPack MP-124 Manual de usuario descargar pdf (Pagina 79)

Configuration Note A. Configuring AudioCodes Analog Telephone Adapters (ATA)

Version 6.6 79 September 2013

A.8 Configuring Gateway Name

The device needs to recognize the incoming calls from the Analog device. To do this, the

ATA must send the INVITE’s with the host name as configured in the SBC Classification

Table. Therefore, you need to configure the ATA with a gateway name corresponding to

the name configured in the device Classification Table (see Section 4.13 on page 52).

 To configure the gateway name:

1. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP

Definitions > Proxy & Registration).

Figure A-9: Configuring Gateway Name

2. In the 'Gateway Name' field, enter identifying name (e.g., analog.com).

3. Click Submit to apply your settings.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 97 98

Sin comentarios

AudioCodes MediaPack MP-124 Manual de usuario Pagina 79