AudioCodes MediaPack MP-124 Manual de usuario Pagina 66

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 98
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 65
Microsoft Lync Server 2013 66 Document #: LTRT-40127
Enhanced Gateway with Analog Devices
4.15.3 Configuring Comfort Noise and Gain Control
The Microsoft Lync network provides high voice quality by implementing suppression of
typing noise during calls and improved generation of “comfort noise,” which reduces
hissing and smoothes over the discontinuous flow of audio packets. You may need to
configure the Enhanced gateway to match these voice quality features, by enabling silence
suppression, comfort noise generation, automatic gain control (AGC), and echo canceller
(enabled by default).
Note:
Silence suppression is configured per coder type, as described in
Step 10 (Section 4.10 on page 44).
To configure voice quality:
1. Open the RTP/RTCP Settings page (Configuration tab > VoIP menu > Media >
RTP/RTCP Settings).
Figure 4-45: RTP/RTCP Settings Page
2. From the 'Enable RFC 3389 CN payload Type' drop-down list, select Enable.
3. From the 'Comfort Noise Generation Negotiation' drop-down list, select Enable to
enable comfort noise generation.
4. Click Submit.
5. Open the IPMedia Settings page (Configuration tab > VoIP menu > Media >
IPMedia Settings).
Vista de pagina 65
1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 97 98

Comentarios a estos manuales

Sin comentarios