AudioCodes MediaPack MP-124 Manual de usuario descargar pdf (Pagina 35)

Configuration Note 4. Configuring the Device

Version 6.6 35 September 2013

4.7 Step 7: Configuring a SIP TLS Connection

This step shows how to configure the device to use a TLS connection with the Lync 2013

Mediation Server. This step is mandatory to secure a SIP TLS connection.

4.7.1 Configuring the NTP Server Address

This step shows how to configure the NTP server's IP address. It's recommended to

implement an NTP server (Microsoft NTP server or third-party server) to ensure that the

device receives an accurate and current date and time. This is necessary for validating the

certificates of remote parties.

 To configure the NTP server address:

1. Open the Application Settings page (Configuration tab > System > Application

Settings).

2. In the 'NTP Server IP Address' field, enter the IP address of the NTP server

(e.g., 10.15.25.1).

Figure 4-12: Configuring the NTP Server IP Address

3. Click Submit.

4.7.2 Configuring the DNS Server

Configure the IP address of the Domain Name System (DNS) servers. This is required if

the Mediation server is configured with an FQDN, in which case, the DNS is used to

resolve it into an IP address.

The procedure for configuring the DNS is described in Section 4.1 on page 21.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 97 98

Sin comentarios

AudioCodes MediaPack MP-124 Manual de usuario Pagina 35