AudioCodes MediaPack 114 Manual de usuario Pagina 163
- Pagina / 390
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Version 5.6 163 November 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Port
[PREFIX_DestPort]
The destination port to where you want to route the Tel-to-IP call.
Transport Type
[PREFIX_TransportType]
The transport layer type for sending the Tel-to-IP calls:
[-1] Not Configured
[0] UDP
[1] TCP
[2] TLS
Note: When 'Not Configured' is selected, the transport type defined
by the parameter SIPTransportType (refer to ''SIP General
Parameters'' on page 101) is
used.
Dest IP Group ID
[PREFIX_DestIPGroupID]
The IP Group (1-9) to where you want to route the Tel-to-IP call. The
SIP INVITE messages are sent to the IP address(es) of the Proxy
Set that is associated with the selected IP Group.
If you select an IP Group, it is unnecessary to configure a destination
IP address (in the 'Dest IP Address' field). However, if both
parameters are configured, the INVITE message is sent only to the
IP Group.
If the parameter AlwaysUseRouteTable is set to 1 (in the 'IP Group'
table, refer to ''Configuring the IP Groups'' on page 186), the re
quest
URI host name in the INVITE message is set to the value of the
parameter 'Dest IP Address' (if not empty); otherwise, it is set to the
value of the parameter 'SIP Group Name' (defined in the 'IP Group'
table).
Note: To configure Proxy Sets, refer to ''Proxy Sets Table'' on page
120.
IP Profile ID
[PREFIX_ProfileId]
The IP Profile ID (configured in ''Configuring the Profile Definitions''
on page 169) assi
gned to this routing rule entry for the IP destination.
Status
A read-only field representing the Quality of Service of the
destination IP address:
n/a = Alternative Routing feature is disabled.
OK = IP route is available.
Ping Error = No ping to IP destination; route is not available.
QoS Low = Bad QoS of IP destination; route is not available.
DNS Error = No DNS resolution (only when domain name is used
instead of an IP address).
Charge Code
[PREFIX_MeteringCode]
An optional Charge Code (1 to 25) can be applied to each routing
rule to associate it with an entry in the Charge Code table (refer to
“Charge Codes Table” on page 146).
- User's Manual 1
- Table of Contents 3
- List of Figures 8
- List of Tables 11
- WEEE EU Directive 13
- Customer Support 13
- Trademarks 13
- Related Documentation 14
- 1 Overview 15
- 1.2 MediaPack Features 16
- 1.3 SIP Overview 17
- Reader’s Notes 18
- 2 Configuration Concepts 19
- 3 Web-Based Management 21
- 3.3.1 Toolbar 24
- 3.3.2 Navigation Tree 25
- 3.3.3.1 Accessing Pages 28
- 3.3.3.2 Viewing Parameters 28
- 3.3.3.5 Working with Tables 32
- 3.3.5.1 Creating a Scenario 36
- 3.3.5.3 Editing a Scenario 39
- 3.3.5.6 Deleting a Scenario 42
- 3.3.7 Getting Help 47
- 3.3.8 Using the Home Page 48
- (grey): channel inactive 49
- 3.4 Configuration Tab 52
- [0] = OAMP (default) 65
- [1] = Media 65
- [2] = Control 65
- 3.4.2 Media Settings 67
- [2] Bypass 70
- [3] Events Only 70
- 3.4.3 Security Settings 79
- [1] Enable = Enabled 116
- [0] Disable (default) 116
- [1] Enable 116
- 5 steps: 120
- To the default Proxy 121
- 3.4.4.1.4 Coders 123
- 4 steps: 130
- 3.4.4.2.3 Metering Tones 144
- 3.4.4.2.5 Keypad Features 147
- 3.4.4.6.1 Authentication 175
- 3.4.4.6.2 Automatic Dialing 176
- 3.4.4.6.4 Call Forward 178
- 3.4.4.6.6 Call Waiting 180
- Disable (default) 188
- No = Don't register 189
- Yes = Register 189
- 3.4.5 Advanced Applications 190
- [1] Enable (Bellcore) 194
- [2] Ericsson MD-110 194
- [3] NEC (ICS) 194
- 3.5 Management Tab 198
- 3.5.1.3 Maintenance Actions 207
- 2 steps: 209
- 3.5.2 Software Update 210
- 3.6.2 Gateway Statistics 223
- 3.6.2.1 Call Counters 224
- 3.6.2.2 Call Routing Status 226
- 3.6.2.3 Registration Status 227
- 3.6.2.5 IP Connectivity 228
- 4 ini File Configuration 231
- 4.2 The ini File Structure 232
- 4.3 Modifying an ini File 235
- 4.4.1 Networking Parameters 236
- 4.4.2 System Parameters 244
- [0] = Disabled (default) 251
- 4.4.4 Security Parameters 252
- 4.4.5 RADIUS Parameters 257
- 4.4.6 SNMP Parameters 258
- [1] = Enabled 268
- Port = Port number 268
- UserId = User name 272
- UserPassword = Password 272
- 4.4.8 Voice Mail Parameters 277
- 4.4.9 PSTN Parameters 279
- [66] = TBR21 280
- Npi = Number Plan 297
- Ton = Type of Number 297
- 4.4.12 Channel Parameters 298
- [0] = Disable (default) 299
- [1] = Enable 299
- [1] Enable (default) 304
- 5 Default Settings 305
- 6.4 Coefficient File 312
- 6.5 User Information File 313
- 7 IP Telephony Capabilities 315
- 7.1.1 Configuring SAS 316
- 7.3.2.1 T.38 Fax Relay Mode 319
- 7.3.3 Supporting V.34 Faxes 324
- 7.4 FXO Operating Modes 326
- 7.4.1.1 One-Stage Dialing 327
- 7.4.1.2 Two-Stage Dialing 328
- 7.4.1.4 DID Wink 329
- 7.4.2 Telephone-to-IP Calls 330
- Connectivity and QoS) 335
- 7.11 Call Detail Record 339
- 7.13 Configuration Examples 342
- 7.14.3 Call Transfer 359
- 7.14.4 Call Forward 360
- 7.14.5 Call Waiting 361
- 7.14.7 Caller ID 362
- 8 Networking Capabilities 365
- 8.2.1 STUN 366
- 8.2.3 No-Op Packets 367
- 8.3 IP Multicasting 368
- 8.8 VLANS and Multiple IPs 370
- Control: Premium control 372
- Management: Bronze 372
- 10.1 MP-11x Specifications 381
- 10.2 MP-124 Specifications 384
- 11 Glossary 387
Relacionado con productos y manuales para Gateways / Controladores AudioCodes MediaPack 114
(44 paginas)
(44 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales