AudioCodes MediaPack 114 Manual de usuario descargar pdf (Pagina 256)

SIP User's Manual 256 Document #: LTRT-65411

MediaPack Series

Parameter Description

HTTPSRootFileName

Defines the name of the HTTPS trusted root certificate file to be

loaded via TFTP. The file must be in base64-encoded PEM (Privacy

Enhanced Mail) format.

The valid range is a 47-character string.

Note: This parameter is only relevant when the device is loaded via

BootP/TFTP. For information on loading this file via the Web

interface, refer to the Product Reference Manual.

HTTPSPkeyFileName

Defines the name of a private key file (in unencrypted PEM format)

to be loaded from the TFTP server.

HTTPSCertFileName

Defines the name of the HTTPS server certificate file to be loaded

via TFTP. The file must be in base64-encoded PEM format.

The valid range is a 47-character string.

Note: This parameter is only relevant when the device is loaded

using BootP/TFTP. For information on loading this file via the Web

interface, refer to the Product Reference Manual.

VoiceMenuPassword

For a description of this parameter, refer to Configuring the General

Security Settings on page 90.

Internal Firewall Parameters

AccessList

This ini file table parameter configures the device's access list

(firewall), which defines network traffic filtering rules. The format of

this parameter is as follows:

[ACCESSLIST]

FORMAT AccessList_Index = AccessList_Source_IP,

AccessList_Net_Mask, AccessList_Start_Port,

AccessList_End_Port, AccessList_Protocol,

AccessList_Packet_Size, AccessList_Byte_Rate,

AccessList_Byte_Burst, AccessList_Allow_Type;

[\ACCESSLIST]

For example:

[ACCESSLIST]

FORMAT AccessList_Index = AccessList_Source_IP,

AccessList_Net_Mask, AccessList_Start_Port,

AccessList_End_Port, AccessList_Protocol,

AccessList_Packet_Size, AccessList_Byte_Rate,

AccessList_Byte_Burst, AccessList_Allow_Type;

AccessList 10 = mgmt.customer.com, 255.255.255.255, 0, 80, tcp, 0,

0, 0, allow;

AccessList 22 = 10.4.0.0, 255.255.0.0, 4000, 9000, any, 0, 0, 0,

block;

[\ACCESSLIST]

In the example above, Rule #10 allows traffic from the host

‘mgmt.customer.com’ destined to TCP ports 0 to 80. Rule #22 blocks

traffic from the subnet 10.4.xxx.yyy destined to ports 4000 to 9000.

Notes:

 This parameter can include up to 50 indices.

 If the end of the table is reached without a match, the packet is

accepted.

 To configure the firewall using the Web interface and for a

description of the parameters of this ini file table parameter, refer

to ''Configuring the Firewall Settings'' on page 84.

1 2 ... 251 252 253 254 255 256 257 258 259 260 261 ... 389 390

Comentarios a estos manuales

Sin comentarios

AudioCodes MediaPack 114 Manual de usuario Pagina 256

Comentarios a estos manuales

Relacionado con productos y manuales para Gateways / Controladores AudioCodes MediaPack 114