AudioCodes MediaPack 114 Manual de usuario descargar pdf (Pagina 44)

SIP User's Manual 44 Document #: LTRT-65411

MediaPack Series

3.3.6.1.1 Replacing the Corporate Logo with an Image

You can replace the logo that appears in the Web interface's Title bar, using either the Web

interface or the ini file.

¾ To replace the default logo with a different image via the Web

interface, take these 7 steps:

1. Access the device's Web interface (refer to ''Accessing the Web Interface'' on page

21).

2. In the URL field, append the case-sensitive suffix ‘AdminPage’ to the IP address (e.g.,

http://10.1.229.17/AdminPage); the 'Admin' page appears.

3. On the left pane, click Image Load to Device; the 'Image Download' page is

displayed, as shown in the figure below:

Figure 3-23: Image Download Screen

4. Click the Browse button, and then navigate to the folder in which the logo image file

that you want to use is located.

5. Click the Send File button; the image file uploads to the device. When loading is

complete, the page is automatically refreshed and the uploaded logo image is

displayed in the Web interface's title bar.

6. If you want to modify the width of the image, in the 'Logo Width' field, enter the new

width (in pixels) and then click the Set Logo Width button.

7. To save the image to flash memory, refer to ''Saving Configuration'' on page 209.

Notes:

• The logo image must be a GIF, JPG, or JPEG file.

• The logo image must have a fixed height of 30 pixels. The width can be

up to 199 pixels, the default being 141 pixels.

• The size of the image file can be up to 64 Kbytes.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 389 390

Sin comentarios

AudioCodes MediaPack 114 Manual de usuario Pagina 44